15.2~ PLN
(575 JPY)
4 (5 Wszystkie recenzje)
Very Good
The Rubber Bush of the Manufacturer, and combined use.The
Brake hose is clamped and Bolt fixation can be carried out at a car body.since
Coating of is done, even when he has no Bush -- OK -- coming out -- the shin.The Rubber Bush of the Manufacturer, and combined use.The
Brake hose is clamped and Bolt fixation can be carried out at a car body.since
Coating of is done, even when he has no Bush -- OK -- coming out -- the shin.
Reviews For SWAGE-LINE Zacisk węża From Other Webike User
Average
Hmmm...I bought it to stop the brake hose, but the screw does not go through as it is. It seems to have to be bent a little and used again. When it is bent again, the black part (Coating of Rubber?) has been lifted. The price seems to be high for such a thing.View Detail
Excellent
Small parts, but well madeWhat made you decide to buy?
The purpose of the brake hose replacement is to reduce unnecessary contact and to give it a beautiful look
The deciding factor is that it has a coating that helps to prevent rust and scratches
How was your experience with it?
Fitting in with SWAGE-LINE's Rubber Bush, more than you can imagine It was
Coating also has a solid thickness, and it was unavoidably molded by Pliers during installation It did not peel off when the
Was the installation difficult?
It wasn't particularly difficult in the normal Bolt-tightening part, but
As noted below, I felt it would take a hang to install it with a short Boltetc
【Please tell me the installation point and hang】
When I tried to tighten the rubber bush between the rubber bushes with the screw
It is not possible to press it down to the end just by pinching it with your fingers, and the holes are not aligned
The short Bolt was in danger of licking the Screw pile if it was installed as it was
So, I used Pliers to install it in a close approximation of the finished form
[Was there anything that disappointed you?
It was generally in line with my expectations, but I would have liked to have had all the co-ating on anyway
I'm wondering if the parts without Coating will rust or not
Do you have any wishes or improvements you would like to make for the Manufacturer?
It would be nice if you could cover a wider area of the coating, preferably the whole area
Also, contrary to the above, I felt it would be easier to purchase the product if the price was lowered a bit
[Do you have any products to compare it to?
It's not a product, but you can either reuse the OEM Clamp
We have considered whether to purchase and install this product
Rubber Bush has also purchased the SWAGE-LINEBrand stuff
I feel it was the right decision to buy and use the ClampView Detail
Poor
Coating is too durableI was unable to get working time, just opened it and left on Garage.
Did you leave it for about three weeks?
The other day, I tried to install, the coating broke and it was peeling off berries.
Just placing it on Garage makes this terrible.
I do not want to get scratched by Gold genus and hurt by Hose so I will enter the store as it is.
It was Garbage.View Detail
Most Viewed Reviews Of SWAGE-LINE Hose Clips / Clamps
Average
Hmmm...I bought it to stop the brake hose, but the screw does not go through as it is. It seems to have to be bent a little and used again. When it is bent again, the black part (Coating of Rubber?) has been lifted. The price seems to be high for such a thing.View Detail
Excellent
Small parts, but well madeWhat made you decide to buy?
The purpose of the brake hose replacement is to reduce unnecessary contact and to give it a beautiful look
The deciding factor is that it has a coating that helps to prevent rust and scratches
How was your experience with it?
Fitting in with SWAGE-LINE's Rubber Bush, more than you can imagine It was
Coating also has a solid thickness, and it was unavoidably molded by Pliers during installation It did not peel off when the
Was the installation difficult?
It wasn't particularly difficult in the normal Bolt-tightening part, but
As noted below, I felt it would take a hang to install it with a short Boltetc
【Please tell me the installation point and hang】
When I tried to tighten the rubber bush between the rubber bushes with the screw
It is not possible to press it down to the end just by pinching it with your fingers, and the holes are not aligned
The short Bolt was in danger of licking the Screw pile if it was installed as it was
So, I used Pliers to install it in a close approximation of the finished form
[Was there anything that disappointed you?
It was generally in line with my expectations, but I would have liked to have had all the co-ating on anyway
I'm wondering if the parts without Coating will rust or not
Do you have any wishes or improvements you would like to make for the Manufacturer?
It would be nice if you could cover a wider area of the coating, preferably the whole area
Also, contrary to the above, I felt it would be easier to purchase the product if the price was lowered a bit
[Do you have any products to compare it to?
It's not a product, but you can either reuse the OEM Clamp
We have considered whether to purchase and install this product
Rubber Bush has also purchased the SWAGE-LINEBrand stuff
I feel it was the right decision to buy and use the ClampView Detail
Poor
Coating is too durableI was unable to get working time, just opened it and left on Garage.
Did you leave it for about three weeks?
The other day, I tried to install, the coating broke and it was peeling off berries.
Just placing it on Garage makes this terrible.
I do not want to get scratched by Gold genus and hurt by Hose so I will enter the store as it is.
It was Garbage.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING