Materiał] Stal chromolowa (3-warstwowe wykończenie galwaniczne)
[Specyfikacja]Zestaw nakrętek
*Istnieje przypadek, w którym dochodzi do zmiany specyfikacji towaru przez producenta. Proszę zrozumieć.
[O instalacji]
*Wałek osi jest elementem krytycznym.
Instalacja musi być przeprowadzona przez wykwalifikowany personel w specjalistycznym sklepie.
Proszę użyć odpowiedniego narzędzia do kształtu głowy wału.
Jeżeli wał zostanie dokręcony przy użyciu niewłaściwego narzędzia, warstwa powłoki galwanicznej na powierzchni wału zostanie zarysowana i powstanie rdza.
Przed montażem należy nasmarować powierzchnię wału smarem lub innym olejem.
Powierzchnia wału jest pokryta oryginalną "3-warstwową powłoką galwaniczną" firmy KOOD, więc rdza nie pojawi się na samym wale przy normalnym użytkowaniu. Ma to na celu zapobieganie przenoszeniu rdzy z łożysk kół itp., co jest spowodowane różnicą potencjałów elektrycznych między metalami.
Należy przestrzegać momentu dokręcania podanego przez producenta.
Jeśli pojazd jest montowany z użyciem oryginalnej nakrętki, należy ją sprawdzić.
Jeśli nakrętka została uszkodzona w wyniku upadku lub część samozabezpieczająca jest zużyta, należy użyć nowej nakrętki. Ma to na celu uniknięcie uszkodzenia gwintowanej części wału.
O jakości produktu]
Jednakże, jeśli jest jakiś problem, prosimy o kontakt przed rozpoczęciem pracy.
*W żadnym wypadku nie będziemy przyjmować żadnych reklamacji ani zwrotów po montażu (np. po przełożeniu wału przez koło).
O rdzy
Wały KOOD są pokryte "3-warstwową powłoką galwaniczną".
Powłoka jest mocniejsza niż normalna powłoka galwaniczna. W zależności od warunków użytkowania może wystąpić rdza, ale nie ma problemu z jakością.
<Główna przyczyna rdzewienia
Przeniesienie rdzy... Zewnętrzna rdza na powierzchni galwanicznej
Uszkodzenie powłoki galwanicznej... Niewłaściwe użycie narzędzi, nadepnięcie na kamień podczas jazdy, upadek, itp.
*Rdza nie jest objęta gwarancją jakości.
Proszę być ostrzeżonym.
[Material] Chromoly steel (3-layer plating finish)
With plated nut
*There may be changes in product specifications due to the manufacturer's reasons.
*Even if the vehicle is compatible, it will not fit if the front forks are not stock or if the vehicle has been customized.
[About the installation]
*Axle shafts are critical parts.
Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".
It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
・Transferred rust: Rust from the outside gets on the plated surface
・Damage to the plating film... Improper use of tools, flying rocks during riding, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.