Korespondencja temperatury wody (-19,5 do 99,9 stopni)
[Zawartość produktu]
Kompaktowy miernik temperatury korpusu x 1 szt.
Termistor (Czujnik śrubowy stożkowy R1 / 8) x 1 pc.
Złącze termistora (Około 1.000 mm) x 1 pc.
Rzep (25 mm x 55 mm) x 1 pc.
Zapasowy przycisk baterii (LR44Type) x 1 pc.
Instrukcja obsługi x 1 szt.
z filtrem Noise Cut
* Nie może być używany jako wskaźnik temperatury oleju.
* Brak podświetlenia, funkcje zegarka.
* Nie ma funkcji podświetlenia lub funkcji zegara.
* Wyświetlanie temperatury wody niektórych modeli nie będzie stabilne, chyba że filtr przeciwzakłóceniowy (63847) jest zainstalowane.
* Zwróć uwagę na przydatny termistor (ustalona wartość oporu) będzie się różnić w zależności od produktu.
Moment dokręcania termistora (Czujnik śrubowy stożkowy R1 / 8) wynosi 10-13,5 Nm.
* Jeśli chcesz ponownie użyć termistora (Czujnik śrubowy stożkowy R1 / 8) , upewnij się, że używasz nowej taśmy uszczelniającej.
* Jeśli produkt jest używany w warunkach gorących, takich jak w lecie, panel ciekłokrystaliczny może stać się czarny. Dzieje się tak, gdy temperatura panelu przekroczy dopuszczalny zakres i zostanie rozwiązana, jeśli temperatura ciała miernika zostanie schłodzona.
* Nie jest wyposażony w filtr przeciwzakłóceniowy.
* Odpowiednie modele są używane jako wskaźnik temperatury wody. Wymienić czujnik podłączony do produktu na oryginalny czujnik.
* Należy pamiętać, że miejsce montażu HONDA HORNET600 stanie się tyłem głowicy cylindrów.
Water temperature support (-19.5 to 99.9 degrees)
[Product Description]
・Compact balance meter body x 1
・Thermistor (R1/8 taper screw sensor) x 1
・Thermistor joint cable (approx. 1.000mm) x 1
・Velcro (25mm x 55mm) x 1
・Spare button battery (LR44 type) x 1
・User's Manual x 1
With noise cut filter
*Not for use as an oil thermometer.
*No backlight function, no clock function.
*In some vehicles, the water temperature display may not be stable unless a noise cut filter (63487) is installed.
*The thermistor (setting resistance value) that can be used differs depending on the product.
*Tightening torque for thermistor (R1 / 8 taper screw sensor) is 10-13.5N-m.
*When reusing and installing the thermistor (R1 / 8 taper thread sensor), be sure to use a new sealing tape.
*If this product is used under the hot sun in the summer, the LCD panel may turn black.This phenomenon occurs when the temperature of the LCD panel exceeds the allowable temperature, and can be solved by lowering the temperature of the meter itself.
*Compatible models are for use as a water temperature gauge.Replace the sensor supplied with the product with the stock sensor.
*Only HONDA HORNET600 is installed at the rear of the cylinder head.
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.